Skip to content

Dielectrophoretic particle ​

  • 2 state
  • 1 control
  • 1 variable
  • Mayer cost
  • free final time
  • 1 control box
  • 1 variable box
  • 3 boundary
  • OptimalControl valid
  • OptimalControl, scalarized valid
  • JuMP valid

The dielectrophoretic particle problem is a classical time-optimal control benchmark for microfluidic particle manipulation. It models the motion of a particle under a dielectrophoretic force, where the control voltage applied to electrodes directly influences the particle trajectory. Both the particle position and an auxiliary state related to its dipole moment, as well as the control voltage, are decision variables. The objective is to transfer the particle from an initial position to a target position in minimal time, while satisfying bounds on the control input and maintaining the auxiliary state dynamics.

Mathematical formulation ​

The problem can be written as

subject to the dynamics

with boundary conditions

and the constraints

where and are the initial and final particle positions, is a coefficient representing nonlinear interaction with the field, and is a damping coefficient.

Qualitative behaviour ​

  • The optimal control typically saturates at the bounds   , characteristic of time-optimal problems.

  • The auxiliary state evolves according to both the control and its own decay, influencing the particle's acceleration nonlinearly.

  • The final time is free and is adjusted by the optimisation to achieve minimal transfer time.

Characteristics ​

  • Nonlinear dynamics with bilinear and quadratic terms in the control.

  • Time-optimal objective.

  • Widely used as a benchmark in numerical optimal control for microfluidic particle manipulation.

References ​

  • Chang, D. E., Petit, N., & Rouchon, P. (2005). Time-optimal control of a particle in a dielectrophoretic system. International Journal of Robust and Nonlinear Control, 15(7), 769–784. This paper introduces the time-optimal control problem for a particle in a dielectrophoretic system, including the theoretical formulation and analysis of optimal trajectories.

  • Chang, D. E., Petit, N., & Rouchon, P. (2005). Time-optimal control of a particle in a dielectrophoretic system. IFAC 2005 Examples. PDF Provides practical implementations and example trajectories in the context of IFAC benchmark problems for microfluidic particle control.

Parameters ​

ParameterDefault valueUnitMeaning
t00–initial time
x_t01–initial position x of the particle
y_t00–initial value of y
x_tf2–final position x of the particle
α-0.75–coefficient of the quadratic term α u² in the dynamics of x
c1–damping coefficient in the dynamics of y
u_l-1–lower bound of the control u
u_u1–upper bound of the control u
tf_l0.1–lower bound of the final time

Every modeling takes other values with the keyword parameters, merged with these: dielectrophoretic_particle(backend; parameters=(t0=…,)).

Reference objective ​

The best objective among the solves that converged, in each modeling, on the default grid of the modeling: the modelings are independent, each has its own reference. See how the references are computed.

ModelingSchemeGridReference objectiveSolvesDistinct solutionsConfigurations agree
JuMP:trapeze5007.81132402681yes, within 1.2e-07
OptimalControl:trapeze5007.811324026181yes, within 1.2e-07
OptimalControl, scalarized:trapeze5007.81132463531yes, within 0