Skip to content

Balanced field ​

  • 4 state
  • 1 control
  • 1 variable
  • Mayer cost
  • free final time
  • 2 state box
  • 1 control box
  • 1 variable box
  • 6 boundary
  • OptimalControl valid
  • OptimalControl, scalarized valid
  • JuMP valid

The Aircraft Balanced Field Length Calculation is a classic aeronautical engineering problem used to determine the minimum runway length required for a safe takeoff or a safe stop in the event of an engine failure. This implementation focuses on the takeoff climb phase with one engine out, starting from the critical engine failure speed . The parameters are those of a mid-size jet aircraft, the nominal values of the Dymos example.

Mathematical formulation ​

The problem is to minimise the final range to reach the screen height (usually 35 ft). The state vector is   and the control is the angle of attack .

The aerodynamic forces and depend on the angle of attack , velocity , and altitude (ground effect).

Qualitative behaviour ​

Not described yet: the solution is plotted in the tab of each modeling, under Solution.

Characteristics ​

  • Nonlinear dynamics, with a ground effect in the drag model ( coefficient).

  • Boundary conditions representing the conditions and the final climb requirements.

References ​

  • Dymos Documentation. Aircraft Balanced Field Length Calculation.. Illustrates the full multi-phase BFL calculation using Dymos and OpenMDAO.

  • Betts, J. T. (2010). Practical Methods for Optimal Control and Estimation Using Nonlinear Programming. SIAM. Discusses takeoff and landing trajectory optimization in Chapter 6.

Parameters ​

ParameterDefault valueUnitMeaning
t00.0sinitial time, at the speed V1
m79015.8kgmass of the aircraft
g9.80665m/s²gravitational acceleration
ρ1.225kg/m³air density
S124.7m²wing area
CD00.03–zero-lift drag coefficient
AR9.45–aspect ratio of the wing
e0.801–Oswald efficiency factor
CL00.5–lift coefficient at zero angle of attack
CL_max2.0–maximum lift coefficient, reached at α_max
h_w1.0mheight of the wing above the centre of gravity, in the ground effect
span35.7mwingspan
α_max0.1745radangle of attack at the maximum lift coefficient
T120102.0Nthrust, one engine out
r_t0600.0minitial range, at V1
v_t070.0m/sinitial velocity, V1
h_t00.0minitial altitude
γ_t00.0radinitial flight path angle
h_tf10.668mfinal altitude, the screen height of 35 ft
γ_tf0.0873radfinal flight path angle, 5°
v_min1.0m/slower bound of the velocity
α_min0.0radlower bound of the angle of attack
α_max_ctrl0.2618radupper bound of the angle of attack
h_min0.0mlower bound of the altitude
tf_min0.1slower bound of the final time

Every modeling takes other values with the keyword parameters, merged with these: balanced_field(backend; parameters=(t0=…,)).

Reference objective ​

The best objective among the solves that converged, in each modeling, on the default grid of the modeling: the modelings are independent, each has its own reference. See how the references are computed.

ModelingSchemeGridReference objectiveSolvesDistinct solutionsConfigurations agree
JuMP:trapeze200771.011400581yes, within 2.3e-10
OptimalControl:trapeze200771.0114003181yes, within 2.5e-09
OptimalControl, scalarized:trapeze200771.011400531yes, within 0